Harvester bar .404″ XL Spray
Blue Line XL spray bar .404″, right (H), 811PX mounting, 75 cm, 2.0 mm gauge and 15 mm slot.
- Unnecessary leakage is eliminated because the spray bars are designed for right- or left-hand mounting and for heads with or without Supercut (automatic chain tensioning)
- Recommended drive sprocket: 16–18 teeth
| Attributes | Value |
|---|---|
| Gruppkod |
811 PX serien |
| Fäste |
811 PX |
| Längd |
75 |
| Slits |
15 |
| Spårvidd |
2 |
| Passar drivhjul |
16, 17, 18 |
| Variant |
Spray |
Blue Line is Iggesund Forest’s series of harvester bars for professional harvesting, the result of more than 30 years of development and testing. A tempered alloy makes the bars strong, hard-wearing and rigid. The material also dampens vibration, which gives straighter cuts, less wear and longer service life. The lubrication channels are sized for good lubrication and the nose sprocket has hardened shims.
The spread of urea fluid is adapted to the tree diameter by drilling the punched holes in the bar. A drill bit for adjusting the spread is supplied with every bar, under the label on the bar sleeve.
The 800 series fits most modern harvester heads and has a 15 mm slot.
The XL models are slightly wider in the middle of the bar body, which gives the chain a wider and smoother path from drive sprocket to bar. The length is compensated for the wider body, so the same chain length and the same number of drive sprocket teeth as for a standard bar can be used.
