Harvester bar .404″ Spray
Blue Line spray bar .404″, right (H), 701 mounting, 59 cm, 2.0 mm gauge and 10 mm slot.
- Straight/narrow bar body (not “wide” like our other bars)
- Mainly fits Rottne EGS 400, 402, 405 (Rottne thinning harvesters H8-H8D)
- Lubrication holes sized for both oil and grease lubrication
- Unnecessary leakage is eliminated because the spray bars are designed for right- or left-hand mounting and for heads with or without Supercut (automatic chain tensioning)
- Recommended drive sprocket: 10–12 teeth
| Attributes | Value |
|---|---|
| Gruppkod |
701 serien |
| Fäste |
701 |
| Längd |
59 |
| Slits |
10 |
| Spårvidd |
2 |
| Passar drivhjul |
10, 11, 12 |
| Variant |
Spray |
Blue Line is Iggesund Forest’s series of harvester bars for professional harvesting, the result of more than 30 years of development and testing. A tempered alloy makes the bars strong, hard-wearing and rigid. The material also dampens vibration, which gives straighter cuts, less wear and longer service life. The lubrication channels are sized for good lubrication and the nose sprocket has hardened shims.
The spread of urea fluid is adapted to the tree diameter by drilling the punched holes in the bar. A drill bit for adjusting the spread is supplied with every bar, under the label on the bar sleeve.
The 700 series has a mounting that fits many older harvester heads with a 10 mm slot. The model has 2 mounting holes.
